I can make a "free Ravelry download", just don't have the time at the moment.
If you have questions, feel free to drop me a line.
Contact me:
stepheely@aol.com
Ravelry
September Sweater
Preface:
I am not a paid designer. I knit purely for enjoyment! I have never written a pattern with the intention of anyone using it besides myself. However, I had such a response on Ravelry from people who wanted to knit this sweater that I decided to try to organize my notes and come up with guidelines by which to knit something similar to it. I’ll include the cable patterns I used (on the last page), but I don’t remember exactly how I worked the decreases into the cable pattern around the neck area, so I’m leaving you to be creative and pick your own cables.
I will be happy to try to answer questions via my message box on Ravelry, but I can’t be an over-the-shoulder coach! For me, figuring out the quirks and researching to learn new techniques is part of the fun of knitting.
Notes on Construction:
This sweater offers unusual, but simple construction. It is knit sideways starting at the left sleeve. Stitches are then cast on either side of the sleeve to account for the yoke. Then, stitches are decreased to knit the right sleeve. The most confusing part (for me) is casting off and shaping the neck area.
Once the yoke and sleeves are complete, sections are picked up and knit to form the back and fronts. Then, the collar and button bands are picked up and knit last. There is very little seaming involved, but the picking up of stitches creates a type of seam that gives the sweater structure.
Materials
*2 skeins of Lion Brand Fisherman’s Wool – or any other worsted weight yarn that will block nicely (blocking is important for this sweater)
*US size 7 (4.5mm) circular knitting needles
*Whatever materials you use to block – I use big beach towels, a windex bottle full of water, and a bunch of straight pins
*Darning needle
Gauge:
4 sts/inch – the gauge of the rows is not so important, since you will be measuring the length as you go.
Begin at Left Sleeve:
CO 100 sts
Work 2 inches in 2x2 rib
Cable set-up row
Work in pattern for 6-7 inches (or however long you want the sleeve to be).
Adding stitches for yoke:
Using the cable method, cast on 20 sts at the beg of next two rows.
Work cable set-up row – work to match cable pattern on sleeve.
Take the time to recognize how the sweater is already shaping up. Your left sleeve is complete and if you are looking at the RS of the work, the stitches on the left hand side are the front of your sweater and the stitches on the right hand side are the back.
Work in pattern until the piece measures 4.5-5.5 inches from the newly casted on yoke sts. (depending on your bust)
Next row (RS): work 71 sts and join new ball of yarn. Cast off 6 sts for neck, work to end of row. At this point, the back and left front sections are separate, and should be worked separately.
Next row (WS): work all sts in patt until last 2 sts, p2tog. Making sure you keep sts separate, work across the back sts.
Next row: work in patt across
Next row: work in patt, repeating the same decrease for neck as last RS row.
Now you will only work the sts on the front. The back sts will be worked later.
Next row: Repeat decrease at neck on EVERY row. RS rows decrease at beg of row, WS rows decrease at end of row. Work four more decreases – 6 total sts have been decresed at neck. Now cast off the front sts.
Continue working the back for approx 6.5 inches – end on RS row – and put all sts on holder (I kept mine on the needles since I have multiples)
Right Front:
Using new thread, cast on 47 sts (or the amount you casted off from the left front)
Work cable set-up row – mirror the cable pattern on the left front piece.
Next row (WS): work all sts in patt, increase one st at end of row. Then, increase one st at neck each row three more times, then every other row twice (same as the decreases you did for left front)
Next WS row: work all sts in pattern. Cast on 6 sts using backward loop method. Replace back sts to needles (if necessary) and join the front and back.
Work in pattern for 4.5-5.5 inches (or to your measurements).
Cast off 20 sts at the beg of next two rows so you are left with only the right sleeve sts on the needles.
Work so that the right sleeve is the same length as left sleeve and cast off all sts.
Now you will pick up sts for the back and both fronts.
Once these steps are complete, the piece needs to be blocked.
After drying, I sewed the seams up the side and sleeves. Next, I knit the collar then the button band. I did 1 x 1 rib for the collar and 2 x 2 rib for the button band.
A final blocking of the finished sweater may be necessary for the collar and button band to lie smoothly.
Encased Cable Panel (worked over 26 sts)
Row 1 (RS): p3, k3, p4, k6, p4, k3, p3
Rows 2, 4, and 6: k3, p3, k4, p6, k4, p3, k3
Row 3: p3, k3, p4, 3/3 LC, p4, k3, p3
Row 5: Rep row 1
Row 7: p3, 3/2 LC, p2, k6, p2, 2/3 RC, p3
Row 8: k5, p3, k2, p6, k2, p3, k5
Row 9: p5, 3/2 LC, 3/3 LC, 2/3 RC, p5
Row 10: k7, p12, k7
Row 11: p7, (3/3 RC) twice, p7
Row 12: Rep row 10
Row 13: p5, 2/3 RC, 3/3 LC, 3/2 LC, p5
Row 14: Rep row 8
Row 15: p3, 2/3 RC, p2, k6, p2, 3/2 LC, p3
Row 16: Rep row 2
Rep rows 1-16 for Cable Panel
2/3 RC: sl 2 sts to CN, hold in BACK, k3, p2 from CN
3/2 LC: sl 3 sts to CN, hold in FRONT, p2, k3 from CN
3/3 RC: sl 3 sts to CN, hold in BACK, k3, k3 from CN
3/3 LC: sl 2 sts to CN, hold in FRONT, k3, k3 from CN
Double Cable panel(worked over 12 sts):
Row 1, 3: knit
Row 2, 4, 6: purl
Row 5: C6B, C6F
Repeat rows 1-6 for pattern
C6B: sl 3 sts to CN, hold in BACK, k3, k3 from CN
C6F: sl 3 sts to CN, hold in FRONT, k3, k3 from CN
Please let me know if you knit this (or anything similar)!!!
By the way, I would have had this up a week ago, but my family vacationed for Thanksgiving. I'll post details (along with updates on my new project) later.
